bissell big green machine instructions

Unpacking and Inventory of Parts

Begin by carefully unpacking the Bissell Big Green Machine and verifying all components against the provided parts list. Ensure you have the main unit, clean water tank, dirty water tank, hoses, brushes, and any additional accessories. Check for any damage or missing items. Familiarize yourself with each part’s purpose, such as the clean water tank for holding cleaning solution and water, and the dirty water tank for collecting dirty water during cleaning. Properly organizing and accounting for all parts will streamline the assembly process. If any parts are missing or damaged, contact Bissell customer support immediately. This step ensures everything is ready for a smooth setup and operation.

Connecting Hoses and Attachments

Start by removing the clean water tank to access the hose connection points. Attach the cleaning hose to the machine’s hose port and ensure it is securely locked in place. Next, connect the other end of the hose to the clean water tank’s outlet. If using an upholstery or brush attachment, snap it onto the hose end until it clicks. Tighten all connections firmly to prevent leaks. Refer to the user manual for specific diagrams or model-specific instructions, such as for the 86T3 model. Double-check all connections before proceeding to ensure proper function. This step is crucial for maintaining water flow and suction power during cleaning.

Filling the Clean Water Tank

Fill the clean water tank with hot tap water, ensuring not to exceed the maximum fill line. Remove the tank by lifting it from the base and carry it to a water source. Avoid using boiling water, as it may damage the machine. Once filled, securely replace the tank, ensuring it clicks into place. For models like the 86T3, check the manual for specific fill levels. Always use clean water to maintain hygiene and prevent clogging. If using cleaning solutions, add them after filling the tank, following the recommended dosage. Properly securing the tank prevents leaks during operation. Ensure the tank is tightly sealed to maintain suction power. Refer to the user guide for model-specific instructions on filling and preparing the tank for use.

Preparing the Machine for Use

Before using the Bissell Big Green Machine, ensure all parts are properly assembled and secured. Start by unpacking and inventorying all components, following the user manual. Connect the hoses and attachments firmly to avoid leaks. Fill the clean water tank with hot tap water, leaving room for cleaning solutions if needed. Plug in the machine and check for any visible damage to the power cord. Allow the machine to preheat for 1-2 minutes for optimal performance. Always refer to the user manual for specific assembly instructions. Ensure the brush roll is correctly aligned and the tanks are securely locked in place. Proper preparation ensures efficient cleaning and prevents operational issues during use.

Understanding the Control Panel

The control panel of the Bissell Big Green Machine is designed for intuitive operation, featuring buttons and indicators to monitor and adjust settings. The power switch activates the machine, while the spray button controls the release of cleaning solution. Tank indicators show water levels, ensuring you know when to refill or empty. The mode selector allows you to choose between carpet and upholstery cleaning settings. LED lights indicate power status and tank levels. Familiarize yourself with these controls to optimize cleaning efficiency. Always refer to the user manual for detailed explanations of each function and how to customize settings for different cleaning tasks. Proper use of the control panel ensures effective cleaning and prolongs machine longevity.

Operating the Bissell Big Green Machine

Operate the machine by filling the clean water tank, selecting the appropriate mode, and using the spray and suction functions to effectively clean surfaces.

Step-by-Step Cleaning Process

Begin by preparing the area, removing furniture, and vacuuming loose debris. Fill the clean water tank with hot water and add the recommended cleaning solution. Turn on the machine and select the appropriate mode for your surface type. Slowly push the machine forward, releasing the cleaning solution evenly. Use the built-in cleaning tool to scrub stubborn stains, then rinse by suctioning up the solution without releasing more. Repeat if necessary, then allow the surface to air dry completely. Regularly empty and rinse the dirty water tank to maintain performance. Follow these steps for effective and efficient cleaning with the Bissell Big Green Machine.

Using the Machine on Different Surfaces

The Bissell Big Green Machine is versatile and can be used on various surfaces, including carpets, upholstery, and hard floors. For carpets, adjust the cleaning mode to match the fiber type, such as delicate or heavy-duty settings. When cleaning upholstery, use the provided tool to gently scrub stains and avoid over-saturating fabrics. On hard floors, ensure the surface is free of debris and use the appropriate cleaning solution for the material. Always test a small, inconspicuous area first to ensure compatibility and avoid damage.

For pet owners, the machine is particularly effective at removing stains and odors from carpets and upholstery. Use the integrated hot water function for deeper cleaning on stubborn stains. Adjust settings according to surface type for optimal results and to extend the machine’s lifespan.

Adjusting Settings for Optimal Cleaning

Adjusting the settings on your Bissell Big Green Machine ensures effective cleaning across different surfaces. Start by selecting the appropriate cleaning mode for carpets or upholstery. For carpets, choose between light or deep cleaning options based on dirt levels. When using the machine on upholstery, reduce suction power to prevent damage to delicate fabrics.

Use the clean water tank and solution dial to customize the cleaning solution strength. For tough stains, increase the solution flow, and for routine cleaning, reduce it. Always use hot water for better results, as it helps loosen dirt and stains more efficiently. Adjusting these settings properly ensures a thorough clean while preserving the condition of your surfaces.

After cleaning, empty the dirty water tank and rinse it thoroughly to prevent residue buildup, which can affect future cleaning performance.

Emptying and Refilling the Tanks

To maintain performance, empty and refill the tanks regularly. Start by turning off and unplugging the machine. Remove the dirty water tank, empty its contents into a drain, and rinse thoroughly with clean water. Repeat if residual dirt remains.

Next, refill the clean water tank with hot tap water, leaving about an inch at the top to avoid overflow. If using cleaning solutions, add the recommended amount as per the instructions. Avoid overfilling to prevent leaks during operation.

Always use fresh, hot water for optimal cleaning results. Regularly cleaning and drying the tanks prevents bacterial growth and odors. Proper tank maintenance ensures your Bissell Big Green Machine operates efficiently and effectively for years to come.

Using Cleaning Solutions and Additives

For optimal cleaning results, use Bissell-approved cleaning solutions or additives specifically designed for the Big Green Machine. Measure and add the recommended amount of solution to the clean water tank, typically two gallons of hot water. Follow the instructions on the solution label for precise measurements to avoid over-concentration.

Avoid using non-Bissell products, as they may damage the machine or void the warranty. After adding the solution, mix well by gently rocking the tank. For tough stains, pre-treat the area before cleaning. Always rinse the machine thoroughly after use to remove any residual cleaning solution.

Regular use of cleaning solutions helps maintain carpet health and extends the machine’s lifespan. Ensure proper dilution ratios and safe usage to achieve professional-grade cleaning results.

Maintenance and Care

Regular maintenance ensures the Bissell Big Green Machine performs optimally. Clean the machine after each use, check and replace filters, and store it properly to extend its lifespan.

Cleaning the Machine After Use

After each use, thoroughly clean the Bissell Big Green Machine to maintain its performance and prevent mold or odors. Start by emptying both the clean and dirty water tanks, then rinse them with warm water until no cleaning solution or debris remains. Remove and rinse the filter according to the user manual instructions. Use a soft cloth to wipe down the exterior and interior parts, paying attention to areas around the brushes and hoses. Allow all components to air dry completely before storing the machine. Regular cleaning ensures optimal suction power and prevents bacteria growth. For tough stains or odors, mix a mild detergent with warm water and gently scrub affected areas before rinsing thoroughly.

Refer to the user manual for specific cleaning recommendations to keep your machine in top condition.

Storing the Machine Properly

To ensure the longevity of your Bissell Big Green Machine, proper storage is essential. After cleaning, empty both the clean and dirty water tanks completely and rinse them with fresh water to remove any remaining solution or debris. Use a soft cloth to wipe down the exterior and interior, paying special attention to hoses, brushes, and crevices where moisture might collect. Allow all components to air dry thoroughly before storing to prevent mold or mildew growth. Store the machine in a cool, dry place, away from direct sunlight or extreme temperatures. If storing for an extended period, ensure all parts are clean and dry, and consider checking for any blockages in hoses or tanks before reuse. Always refer to the user manual for specific storage recommendations.

Replacing Filters and Parts

Regular maintenance, including replacing filters and parts, is crucial for the optimal performance of your Bissell Big Green Machine. Start by turning off and unplugging the machine before attempting any replacements. Locate the filters, typically found in the recovery tank or near the motor, and remove them according to the user manual instructions. Dispose of the old filters responsibly and install new ones, ensuring they are securely fitted. For other parts, such as brushes or hoses, inspect for wear or damage and replace as needed. Always use genuine Bissell parts to maintain compatibility and performance. Refer to the user manual for specific guidance on replacing components and for identifying the correct replacement parts. Regularly replacing worn or damaged parts will help extend the life of your machine and ensure effective cleaning results.

Regular Maintenance Schedule

Regular maintenance is essential to keep your Bissell Big Green Machine performing at its best. After each use, empty and rinse the recovery tank, and clean the brushes and hoses to prevent debris buildup. Check and replace filters monthly or as recommended in the user manual. Inspect the belts and hoses for signs of wear and replace them annually or sooner if damage is detected. Every 3-6 months, clean the lint trap and pre-filter to ensure proper airflow. Lubricate moving parts, such as wheels and brush bearings, yearly to maintain smooth operation. Schedule a professional inspection and servicing every 12-18 months to address any internal issues. By following this maintenance schedule, you can extend the life of your machine and ensure consistent cleaning performance.

Troubleshooting Common Issues

Identify and resolve issues quickly with this guide covering common problems like low suction, no spray, or brush malfunction. Refer to specific sections for detailed solutions.

No Power or Low Suction

If your Bissell Big Green Machine has no power or low suction, check the power cord for damage or loose connections. Ensure it is properly plugged into a working outlet. Verify that the tank is empty, as a full tank can reduce suction. Inspect the hose and wand for blockages or kinks. Clean or replace the filter if it is dirty or clogged. Check for any obstructions in the machine’s pathways. If issues persist, consult the troubleshooting section in your user manual or contact Bissell support for assistance.

No or Low Spray Function

If the Bissell Big Green Machine is experiencing no or low spray function, first ensure the clean water tank is filled with hot water and the correct cleaning solution. Check the spray tip for blockages and clean or replace it if necessary. Verify that the solution and water lines are not kinked or obstructed. Ensure the machine is turned on and the spray function is activated properly. If the issue persists, prime the pump by depressing the spray trigger for a few seconds. If the problem continues, refer to the user manual for troubleshooting steps or contact Bissell customer support for further assistance. Regular maintenance, such as cleaning the spray nozzle and ensuring proper fluid flow, can help prevent this issue.

Leaking Issues

If the Bissell Big Green Machine is leaking, start by inspecting the hoses and connections for any loose fittings or damage. Tighten any loose connections and replace damaged parts if necessary. Check the clean water tank and recovery tank for cracks or improper sealing. Ensure the tanks are not overfilled, as this can cause leakage during operation. Inspect the gaskets and seals for wear or damage and replace them if needed. If the leak persists, verify that the spray tip is not clogged and clean or replace it if necessary. For severe leaks, consult the user manual or contact Bissell customer support for assistance. Regular maintenance, such as checking and replacing worn seals, can help prevent future leaks.

Brush Not Turning

If the brush on your Bissell Big Green Machine is not turning, first check for blockages in the brush roll or pre-filter. Remove any tangled hair or debris that may be obstructing the brush’s movement. Ensure the brush roll is properly aligned and securely installed. If the issue persists, inspect the drive belt for damage or misalignment. A worn or broken belt may prevent the brush from turning. Replace the belt if necessary. Additionally, check the power settings on the control panel to ensure the brush function is activated. If the problem continues, consult the user manual or contact Bissell customer support for further assistance. Regular maintenance, such as cleaning the brush roll and checking for worn parts, can help prevent this issue.

Safety Instructions

Always read and follow the user manual carefully. Avoid overheating the machine and keep it out of children’s reach. Ensure the area is well-ventilated and dry before use. Never use damaged cords or plugs, and avoid overloading the machine. Store cleaning solutions safely and wear protective gloves during operation. Regularly inspect for worn parts and ensure proper installation of accessories. Follow electrical safety guidelines to prevent shocks or fires. Proper maintenance and adherence to instructions will ensure safe and effective cleaning experiences.

General Safety Precautions

Before using the Bissell Big Green Machine, ensure you read and follow all safety guidelines to avoid accidents. Always keep the machine out of reach of children and pets. Avoid using damaged cords or plugs, as this can lead to electrical hazards. Never operate the machine near open flames or sparks, and ensure the cleaning area is well-ventilated. Wear protective gloves and eyewear during use to prevent exposure to cleaning solutions or debris. Do not overload the machine with excessive water or cleaning agents, as this may cause leaks or malfunction. Regularly inspect hoses and connections for damage and ensure they are securely attached. Store the machine in a dry, cool place when not in use. Always unplug the machine before performing maintenance or repairs. Follow these precautions to ensure safe and effective cleaning experiences with your Bissell Big Green Machine.

Electrical Safety Tips

Always read the user manual thoroughly before using the Bissell Big Green Machine to understand electrical safety guidelines. Avoid using damaged cords, plugs, or electrical components, as they can pose fire or shock hazards. Never unplug the machine by pulling the cord; instead, grasp the plug firmly. Keep the machine away from water sources to prevent electrical accidents. Use only genuine Bissell replacement parts to ensure compatibility and safety. Do not operate the machine near open flames or sparks, and ensure the area is well-ventilated to avoid inhaling fumes. Regularly inspect the power cord and plug for damage before each use. If damaged, replace them immediately. Unplug the machine when not in use or during maintenance to prevent accidental start-ups. Following these electrical safety tips will help ensure a safe and efficient cleaning experience with your Bissell Big Green Machine.

Frequently Asked Questions

Common inquiries include compatibility with other Bissell products, warranty details, and troubleshooting tips. Visit the official Bissell website for detailed answers and support resources.